Transcontinental Packaging
Polyethylene FIBC liner for a bulk bag

Liners & smaller woven

FIBC Liners

Inner barrier liner

FIBC liners are polyethylene liners fitted inside a bulk bag for moisture and contamination protection.

Product description

An FIBC liner sits inside the bulk bag and gives the load a barrier the woven fabric cannot. It comes loose, glued in, or tabbed.

Standard duty runs 2.5 to 3 mil, and heavier gauges run up to 9 mil. Antistatic liners are available where the bag's static classification would otherwise be compromised, and foil constructions where the load needs a full barrier or goes in hot.

Uses

  • Moisture protection for hygroscopic material
  • A food-contact surface inside a standard bag
  • Sift control for fine powders
  • Loads needing a full moisture and oxygen barrier

Industries we supply this for: Ingredients, Food Service, Chemical, Sugar

Configurable options

Everything below is specified per order. Nothing here is a fixed catalogue number.

TypeLoose, glued-in, tabbed
Gauge2.5 mil, 3 mil, up to 9 mil
MaterialPolyethylene, antistatic, foil
GradeFDA food grade, blue, clear or green

Frequently Asked Questions

Will a liner affect my bag's static type?

It can. An insulating polyethylene liner inside a Type B, C or D bag can undo what the fabric is doing. Specify the liner with the bag and we will match them.

Loose or glued-in?

Glued-in stays in place through filling and discharge and is easier for operators. Loose costs less and suits lower throughput. Tabbed sits between the two.

Do I need an FIBC liner?

Most bulk bags need no liner. Add one when the load must stay dry, needs a food-contact surface, or is a fine powder that could sift through the weave.

What thickness FIBC liner do I need?

2.5 to 3 mil suits most dry products. Heavier liners, up to 9 mil, are for sharp, heavy or abrasive product that could puncture thinner film.

Are your FIBC liners food grade?

Food grade liners come in FDA food grade film in blue, clear or green. For food-contact use, ask us for the documentation that covers your application.

What should I send for an FIBC liner quote?

Your product, the bag's size, construction and static type, how you fill and empty it, and your preferred fitting if you have one. We will match the liner to the bag.

Send us the load, not a part number.

Material, fill weight, how you fill and how you discharge. That is enough for us to come back with a specification.

Request a Quote